Draytek Vigor2762 series User Manual page 543

fault: 1500 (Bytes)
e.x: >msubnet mtu LAN1 1492
Current Settings:
LAN1 MTU:
LAN2 MTU:
LAN3 MTU:
LAN4 MTU:
IP Routed Subnet MTU: 1500 (Bytes)
Telnet Command:
Telnet Command:
This command is used to create an IP object profile.
object ip obj setdefault
object ip obj INDEX -v
object ip obj INDEX -n NAME
object ip obj INDEX -i INTERFACE
object ip obj INDEX -s INVERT
object ip obj INDEX -a TYPE [START_IP] [END/MASK_IP]
Syntax Description
Syntax Description
Parameter
setdefault
INDEX
-v
-n NAME
-i INTERFACE
-s INVERT
-a TYPE
[START_IP]
Vigor2762 Series User's Guide
1492 (Bytes)
1500 (Bytes)
1500 (Bytes)
1500 (Bytes)
object ip obj
object ip obj
Description
It means to return to default settings for all profiles.
It means the index number of the specified object profile.
It means to view the information of the specified object profile.
Example:
It means to define a name for the IP object.
NAME: Type a name with less than 15 characters.
Example:
It means to define an interface for the IP object.
INTERFACE=0, means any
INTERFACE=1, means LAN
INTERFACE=3, means WAN
Example:
It means to set invert seletion for the object profile.
INVERT=0, means disableing the function.
INVERT=1, means enabling the function.
Example:
It means to set the address type and IP for the IP object profile.
TYPE=0, means Mask
TYPE=1, means Single
TYPE=2, means Any
TYPE=3, means Rang
Example:
When the TYPE is set with 2, you have to type an IP address as a
object ip obj 1 -v
object ip obj 9 -n bruce
object ip obj 8 -i 0
object ip obj 3 -s 1
object ip obj 3 -a 2
533