Draytek Vigor2762 series User Manual page 512

> ip6 tspc 2
Local Endpoint v4 Address : 111.243.177.223
Local Endpoint v6 Address :
2001:05c0:1400:000b:0000:0000:0000:10b9
Router DNS name : 8886666.broker.freenet6.net
Remote Endpoint v4 Address :81.171.72.11
Remote Endpoint v6 Address :
2001:05c0:1400:000b:0000:0000:0000:10b8
Tspc Prefixlen : 56
Tunnel Broker: Amsterdam.freenet.net
Status: Connected
>
Telnet Command:
Telnet Command:
This command allows you to enable or disable RADVD server.
Syntax
Syntax
Ip6 radvd [LAN1|LAN2|...|LAN4] [-<command> <parameter>| ... ]
ip6 radvd [R|u]
Syntax Description
Syntax Description
Parameter
LAN1|LAN2|...|LAN4
<command> <parameter>
-s
-D <1/0>
-d <lifetime>
-i <lifetime>
-I <lifetime>
Lifetime
-h <hoplimit>
-m <mtu/auto>
-e <time>
-a <time/infinity>
-p <0/1/2>
-v
502
ip6 radvd
ip6 radvd
Description
It means to specify LAN interface for such address.
It means to enable or disable the default lifetime of the RADVD
server.
1: Enable the RADVD server.
0: Disable the RADVD server.
Enable/Disable the RDNSS.
Set the default lifetime for RADVD server.
Set the mininum interval time(sec) for RADVD server.
Set the maximum interval time(sec) for RADVD server.
It means to set the lifetime.
The lifetime associated with the default router in units of seconds.
It's used to control the lifetime of the prefix. The maximum value
corresponds to 18.2 hours. A lifetime of 0 indicates that the router
is not a default router and should not appear on the default router
list.
Type the number (unit: second) you want.
Set hop limit for RADVD server.
Set MTU value for RADVD server.
Range: 1280-1500.
auto - auto select MTU from WAN.
Set reachable time.
Set retransmit timer /infinity.
Set default preference Low/Medium/High for RADVD server.
View the RADVD server configuration.
Vigor2762 Series User's Guide