I-1-1 Indicators And Connectors - Draytek Vigor2762 series User Manual

I-1-1 Indicators
I-1-1 Indicators
Before you use the Vigor router, please get acquainted with the LED indicators and
connectors first.
LED
(Activity)
(2.4GHz
Wireless LAN
On/Off/WPS)
(5GHz
Wireless LAN
On/Off/WPS)
(USB)
(DSL)
~
(LAN1/2/3/4)
Vigor2762 Series User's Guide
and Connectors
and Connectors
Status Explanation
Blinking The router is ready and operating normally
Off The router is powered off.
On (Green) 2.4GHz Access Point is active
Blinking Data is being transmitted on the router's 2.4 GHz
(Green) wireless interface
Blinking WPS pairing mode is active for two minutes
(Orange)
Off The wireless access point is turned off.
On (Green) 5GHz Access Point is turned off
Blinking Data is being transmitted on the router's 5GHz wireless
(Green) interface
Blinking WPS pairing mode is active for two minutes
(Orange)
On USB device is connected and ready for use
Blinking Data is being transmitted over USB
On DSL connection synchronised
Blinking DSL connection not currently synchronising or
(Slowly)
not detected
Blinking DSL connection is synchronising
(Quickly)
On Ethernet LAN (RJ45) is connected
Blinking Data is transmitting (sending/receiving)
Off Ethernet LAN is disconnected
3