Vi-1-15 Activation - Draytek Vigor2762 series User Manual

Adsl2/2+ and vdsl2 router

Hide thumbs Also See for Vigor2762 series:

Table of Contents

VI-1-15 Activation

There are three ways to activate WCF on vigor router, using Service Activation Wizard, by

means of CSM>>Web Content Filter Profile or via System Maintenance>>Activation.

After you have finished the setting profiles for WCF (refer to Web Content Filter Profile), it

is the time to activate the mechanism for your computer.

Click System Maintenance>>Activation to open the following page for accessing

http://myvigor.draytek.com.

Available settings are explained as follows:

Activate via Interface

Authentication Message

Below shows the successful activation of Web Content Filter:

Vigor2762 Series User's Guide

Choose WAN interface used by such device for activating Web

Content Filter.

The Activate link brings you accessing into

www.vigorpro.com to finish the activation of the account

and the router.

As for authentication information of web filter, the process

of authenticating will be displayed on this field for your

Show Quick Links

Table of Contents