Draytek Vigor2762 series User Manual page 623

Telnet Command:
Telnet Command:
This command allows users to configure VPN Backup, VPN load balance, GRE over IPsec, and
Binding tunnel policy.
vpn trunk show_usable
vpn trunk backup <add/del> <name> <Member#1> <Member#2>
vpn trunk backup more_syslog <ON/OFF>
vpn trunk backup ERD <name> <Normal/Recover/Resume><second>
vpn trunk lb <add/del> <name> <Member#1> <Member#2>
vpn trunk lb more_syslog <ON/OFF>
vpn trunk lb algorithm <name> <RR>
vpn trunk lb algorithm <name><W-RR><Auto> <AccordingRatio> <Member1:Member2>
vpn trunk lb algorithm <name><Fastest>
vpn trunk bind usage <BindIndex>
vpn trunk bind show <LoadBalanceName>
vpn trunk bind reset_default
vpn trunk bind more_syslog <ON/OFF>
vpn trunk bind set <BindIndex> <ACT> <TrunkName> <Member> <SrcIp:A~B> <DstI p:A~B>
<DstPort:A~B> <Proto> <Frag>
vpn trunk bind insert <After_BindIndex> <ACT> <TrunkName> <Member> <SrcIp:A~B>
<DstIp:A~B> <DstPort:A~B> <Proto> <Frag>
vpn trunk SetGre show <Dialout_Index>
vpn trunk SetGre <Active/In-
active><Dialout_Index><GRE_MyIP><GRE_PeerIP><Logical_Traffic>
vpn trunk An_Gre GreIPsecAnalyze <ON/OFF>
Syntax Description Syntax Description
Parameter
show_usable
backup <add/del> <name>
<Member#1> <Member#2>
backup more_syslog
<ON/OFF>
lb more_syslog <ON/OFF>
bind more_syslog <ON/OFF>
backup ERD <name>
<Normal/Recover/Resume>
<second>
Vigor2762 Series User's Guide
vpn trunk
vpn trunk
Description
Display a list of LAN to LAN dial out profiles.
Set multiple VPN tunnels (LAN to LAN profiles) as backup tunnel.
add/del - Add or delete a profile for used in VPN Trunk.
name – Specify the name of the VPN trunk.
Member#1 – Indicate the first LAN to LAN profile.
Member#2 – Indicate the second LAN to LAN profile.
These commands are used for RD debug.
ERD means Environment Recovers Detection.
name – Specify the name of the VPN trunk.
Normal – Indicate the Normal mode. All dial-out VPN TRUNK
backup profiles will be activated alternatively.
Recover – Indicate the duration of VPN backup operation.
Resume – When VPN connection breaks down or disconnects,
Member 1 will be the top priority for the system to do VPN
connection.
Second – "0" means to dial each six seconds automatically. "60 ~
613