Draytek Vigor2762 series User Manual page 546

Telnet Command:
Telnet Command:
This comman is used to create an IP object profile.
object ip obj setdefault
object ip obj INDEX -v
object ip obj INDEX -n NAME
object ip obj INDEX -i INTERFACE
object ip obj INDEX -s INVERT
object ip obj INDEX -a TYPE [START_IP] [END/MASK_IP]
Syntax Description
Syntax Description
Parameter
setdefault
INDEX
-v
-n NAME
-i INTERFACE
-s INVERT
-a TYPE
[START_IP]
[END/MASK_IP]
Example
Example
> object ip obj 1 -n marketing
> object ip obj 1 -a 1 192.168.1.45
> object ip obj 1 -v
IP Object Profile 1
Name
Interface:[Any]
536
object ip v6 obj
object ip v6 obj
Description
It means to return to default settings for all profiles.
It means the index number of the specified object profile.
It means to view the information of the specified object profile.
Example:
It means to define a name for the IP object.
NAME: Type a name with less than 15 characters.
Example:
It means to define an interface for the IP object.
INTERFACE=0, means any
INTERFACE=1, means LAN
INTERFACE=3, means WAN
Example:
It means to set invert seletion for the object profile.
INVERT=0, means disableing the function.
INVERT=1, means enabling the function.
Example:
It means to set the address type and IP for the IP object profile.
TYPE=0, means Mask
TYPE=1, means Single
TYPE=2, means Any
TYPE=3, means Rang
Example:
When the TYPE is set with 2, you have to type an IP address as a
starting point and another IP address as end point.
Type an IP address.
Type an IP address (different with START_IP) as the end IP
address.
:[marketing]
object ip obj 1 -v
object ip obj 9 -n bruce
object ip obj 8 -i 0
object ip obj 3 -s 1
object ip obj 3 -a 2
Vigor2762 Series User's Guide