Draytek Vigor2762 series User Manual page 490

> ip wanrip ?
Valid ex:ip wanrip <ifno> -e <0/1>
<ifno> 1: WAN1,2: WAN2
-e <0/1>
Now status:
WAN[1] Rip Protocol disable
WAN[2] Rip Protocol disable
WAN[3] Rip Protocol disable
WAN[4] Rip Protocol disable
WAN[5] Rip Protocol disable
> ip wanrip 5 -e 1
> ip wanrip ?
Valid ex:ip wanrip <ifno> -e <0/1>
<ifno> 1: WAN1,2: WAN2
-e <0/1>
Now status:
WAN[1] Rip Protocol disable
WAN[2] Rip Protocol disable
WAN[3] Rip Protocol disable
WAN[4] Rip Protocol disable
WAN[5] Rip Protocol enable
>
Telnet Command:
Telnet Command:
This command allows users to set static route.
Syntax
Syntax
ip route add [dst] [netmask][gateway][ifno][rtype]
ip route del [dst] [netmask][rtype]
ip route status
ip route cnc
ip route default [wan1/wan2/off/?]
ip route clean [1/0]
Syntax Description Syntax Description
Parameter
add
del
status
dst
netmask
gateway
ifno
480
3: PVC3,4: PVC4,5: PVC5
0: disable, 1: enable
3: PVC3,4: PVC4,5: PVC5
0: disable, 1: enable
ip route
ip route
Description
It means to add an IP address as static route.
It means to delete specified IP address.
It means current status of static route.
It means the IP address of the destination.
It means the netmask of the specified IP address.
It means the gateway of the connected router.
It means the connection interface.
3=WAN1, 4=WAN2, 5=WAN3, 6=WAN4
Vigor2762 Series User's Guide