Draytek Vigor2762 series User Manual page 185

Available settings are explained as follows:
Item
Enable Mac Address Filter
MAC Address Filter
Client's MAC Address
Apply SSID
Attribute
Comment
Add
Delete
Edit
Cancel
Vigor2762 Series User's Guide
Description
Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
(expressed by MAC addresses) listed in the box can be
grouped under different wireless LAN. For example, they
can be grouped under SSID 1 and SSID 2 at the same time if
you check SSID 1 and SSID 2.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
After entering the client's MAC address, check the box of
the SSIDs desired to insert this MAC address into their access
control list.
s: Isolate the station from LAN - select to isolate the
wireless connection of the wireless client of the MAC
address from LAN.
Type a brief description for the specified client's MAC
address.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
175