Draytek Vigor2866 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Draytek Manuals
  4. Network Router
  5. Vigor2866 Series
  6. Quick start manual

Draytek Vigor2866 Series Quick Start Manual

G.fast security firewall
Hide thumbs Also See for Vigor2866 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
i

Advertisement

Table of Contents
loading

Related Manuals for Draytek Vigor2866 Series

Summary of Contents for Draytek Vigor2866 Series

  • Page 2 Vigor2866 Series G.Fast Security Firewall Quick Start Guide (for RF Model) Version: 1.0_(Official) Firmware Version: V4.3.2 (For future update, please visit DrayTek web site) Date: September 29, 2021...
  • Page 3 Intellectual Property Rights (IPR) Information © All rights reserved. This publication contains information that is protected Copyrights by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks ...
  • Page 4 Declaration of Conformity Hereby, DrayTek Corporation declares that the radio equipment type Vigor2866 series is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.draytek.com.tw/ftp/Vigor2866/Document/CE/ Manufacturer: DrayTek Corp.
  • Page 5 User Manual Information Agreement This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains, among other information, the ACTA registration number and ringer equivalence number (REN.) If requested, this information must be provided to the telephone company. The REN is used to determine the quantity of devices which may be connected to the telephone line.
  • Page 6 88.6% 88.2% efficiency Efficiency at low load 73.6% 78.0% 81.3% 83.3% 83.7% 74.5% 80.5% 86.4% 85.4% No-load power 0.07W 0.07W 0.07W 0.07W 0.07W 0.07W 0.10W 0.07W 0.10W consumption External power supply (Power Adapter) information. For more update, please visit www.draytek.com.

  • Page 7: Table Of Contents

    1. Package Content ....................1 2. Panel Explanation....................2 2.1 Vigor2866L ..........................2 2.2 Vigor2866ac / Vigor2866 ax / Vigor2866Lac..................4 2.3 Vigor2866Vac ..........................8 3. Hardware Installation ..................11 3.1 Network Connection ........................11 3.2 Wall-Mounted Installation ......................12 4. Software Configuration ..................13 4.1 Quick Start Wizard for Network Connection................

  • Page 8: Package Content

    Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Besides, the content is subject to the real package. Vigor Router Antenna + Socket (L models) RJ-45 Cable (Ethernet) RJ-11 to RJ-11 Cable or RJ-11 to RJ-45...

  • Page 9: Panel Explanation

    Status Explanation The router is powered off. Blinking The router is powered on and running normally. Internet connection is ready. WAN2 Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. The QoS function is inactive. LTE device is connected and ready for use.
  • Page 10 The port is connected with 1000Mbps. Right LED The port is connected with 10/100Mbps. LAN P1-P5 The port is connected. Left LED The port is disconnected. Blinking The data is transmitting. The port is connected with 1000Mbps. Right LED The port is connected with 10/100Mbps Interface Description Restore the default settings.

  • Page 11: Vigor2866Ac / Vigor2866 Ax / Vigor2866Lac

    Status Explanation The router is powered off. Blinking The router is powered on and running normally. Internet connection is ready. WAN2 Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. The QoS function is inactive. USB device is connected and ready for use.
  • Page 12 WLAN: Wireless access point is ready. Wireless function is disabled. It will blink slowly while wireless traffic goes through. ACT and WLAN LEDs blink quickly and Blinking simultaneously when WPS is working, and will return to normal condition after two minutes. (You need to setup WPS within 2 minutes.) The DMZ function is enabled.
  • Page 13 No. Interface Description Wireless band will be switched /changed according to the button pressed and released. For example,  2.4G (On) and 5G (On) – in default.  2.4G (Off) and 5G (On) – pressed and released the button once. Wireless LAN ...
  • Page 14 connection or WAN connection according to the settings configured in WUI. Connecters for local network devices. LAN P1-P5 Connecter for accessing the Internet. Connecter for installing WLAN antennas. (For ac model) Connecter for a power adapter. ON/OFF Power Switch. Connecter for installing LTE antennas. (For L model).

  • Page 15: Vigor2866Vac

    Status Explanation The router is powered off. Blinking The router is powered on and running normally. Internet connection is ready. WAN2 Internet connection is not ready. Blinking The data is transmitting. The QoS function is active. The QoS function is inactive. USB device is connected and ready for use.
  • Page 16 The port is connected. Left LED The port is disconnected. Blinking The data is transmitting. The port is connected with 1000Mbps. Right LED The port is connected with 10/100Mbps Interface Description Wireless band will be switched /changed according to the button pressed and released.
  • Page 17 Connecter for accessing the Internet. Connecter for installing WLAN antennas. Connecter for a power adapter. ON/OFF Power Switch.

  • Page 18: Hardware Installation

    This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. (For the hardware connection, we take “ac” model as an example.) Connect the DSL interface to the land line jack with a DSL line cable, or Connect the cable Modem/DSL Modem/Media Converter to the WAN port of router with Ethernet cable (RJ-45).

  • Page 19: Wall-Mounted Installation

    Vigor router has keyhole type mounting slots on the underside. Drill two holes on the wall. The distance between the holes shall be 168mm. Fit screws into the wall using the appropriate type of wall plug. Note The recommended drill diameter shall be 6.5mm (1/4”). When you finished about procedure, the router has been mounted on the wall firmly.

  • Page 20: Software Configuration

    To access Internet, please finish basic configuration after completing the hardware installation. The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web User Interface.
  • Page 21 Now, the Main Screen will pop up. Click Wizards>>Quick Start Wizard. Note The home page will change slightly in accordance with the router you have. Here we take Vigor2866ac as an example. If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickly.
  • Page 22 click Next for next step. Each WAN interface will bring up specific configuration page. Here, we take WAN1 as an example. Click Next to go to the following page. You have to select the appropriate Internet access type according to the information from your ISP. For example, you should select PPPoA mode if the ISP provides you PPPoA interface.
  • Page 23 Choose WAN1 as WAN Interface and click the Next button; you will get the following page. After finished the above settings, simply click Next.
  • Page 24 Please manually enter the Username/Password provided by your ISP. Then click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet.
  • Page 25 Choose WAN1 as WAN Interface and click the Next button; you will get the following page. Please type in the IP address/mask/gateway information originally provided by your ISP. Then click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown.

  • Page 26: Customer Service

    Web registration is preferred. You can register your Vigor router via https://myvigor.draytek.com. & & Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. https://www.draytek.com...

This manual is also suitable for:

Vigor2766 seriesVigor2866lVigor2866acVigor2866axVigor2866lacVigor2866vac

Table of Contents