Draytek Vigor2762 series User Manual page 469

Commands under CSM allow you to set CSM profile to define policy profiles for different
policy of IM (Instant Messenger)/P2P (Peer to Peer) application.
"csm appe prof " is used to configure the APP Enforcement Profile name. Such profile will
be applied in Default Rule of Firewall>>General Setup for filtering.
Syntax
Syntax
csm appe prof -i INDEX [-v | -n NAME|setdefault]
Syntax Description
Syntax Description
Parameter
INDEX
- v
- n
NAME
setdefault
Example
Example
> csm appe prof -i 1 -n games
The name of APPE Profile 1 was setted.
Telnet Command:
Telnet Command:
It is used to configure group settings for IM/P2P/Protocol and Others in APP Enforcement
Profile.
Syntax
Syntax
csm appe set -i INDEX [-v GROUP| -e AP_IDX | -d AP_IDX| -a AP_IDX [ACTION]]
Syntax Description
Syntax Description
Parameter
INDEX
- v
-e
-d
-a
GROUP
AP_IDX
ACTION
Vigor2762 Series User's Guide
Description
Specify the index number of CSM profile, from 1 to 32.
View the configuration of the CSM profile.
Set a name for the CSM profile.
Specify a name for the CSM profile, less then 15 characters.
Reset to default settings.
csm appe set
csm appe set
Description
Specify the index number of CSM profile, from 1 to 32.
View the IM/P2P/Protocol and Others configuration of the CSM
profile.
Enable to block specific application.
Disable to block specific application.
Set the action of specific application
Specify the category of the application. Available options are: IM,
P2P, Protocol and Others.
Each application has independent index number for identification
in CLI command.
Specify the index number of the application here. If you have no
idea of the inex number, do the following (Take IM as an
example):
Type "csm appe set –I 1 –v IM", the system will list all of the index
numbers of the applications categorized under IM.
Specify the action of the application, 0 or 1.
0: Block. All of the applications meet the CSM rule will be blocked.
1: Pass. All of the applications meet the CSM rule will be passed.
459