Draytek Vigor2762 series User Manual page 507

-T n
For TSPC/AICCU
-u [username]
-P [password]
-s [server]
For AICCU
-p [prefix]
-l n
-o [0/1]
-f [Tunnel ID]
For Static
-w [addr]
For others
-d <server>
-D <server>
-t <dhcp/ra/none>
-V
-k
-j
-r n
-c n
-q [value]
-z [value]
-x [hostname/IPv6 address]
-I [interval]
-b [0/1]
Example
Example
Vigor2762 Series User's Guide
Set 6in4 Tunnel TTL.
n=1 to 255. (Default number is 255)
Set Username (max. 63 characters).
Set Password (max. 63 characters).
Set Tunnel Server IP.
server= IPv4 Address or URL (max. 63 characters).
Set Subnet Prefix (AICCU).
prefix=IPv6 address.
Subnet Prefix length (AICCU)
n=1 to 64. (Default number is 64).
Set AICCU always on. On = 1, Off = 0.
Set AICCU tunnel ID.
Tunnel ID= the number (e.g., T345678) offered by tunnel broker.
Set Default Gateway.
Addr= IPv6 address.
Set 1st DNS Server IP
server= IPv6 Address.
Set 2nd DNS Server IP.
server= IPv6 Address.
Set ipv6 PPP WAN test mode for DHCP or RA.
View IPv6 Internet Access Profile.
Dial the Tunnel on the WAN.
Drop the Tunnel on the WAN.
Set Prefix State Machine RA timeout.
n=any value (default is 15), (unit: second)
Set Prefix State Machine DHCPv6 Client timeout.
n=any value (default is 15), (unit: second)
Set WAN detection mode.
0: NS Detect.
1: Ping Detect.
2: Always On.
Set Ping Detect TTL.
value= 0 ~ 255.
Set Ping Detect Host (hostname or IPv6 address).
Set ipv6 connection interval.
Interval = 1500-60000 (unit:10ms).
Enable DNSv6 based on DHCPv6.
0= off
1= on
497