Viii-1-12 Syslog Explorer - Draytek Vigor2762 series User Manual

Protocol
Host/IP Address
Trace Host/IP Address
Run
Clear

VIII-1-12 Syslog Explorer

VIII-1-12 Syslog Explorer
Such page provides real-time syslog and displays the information on the screen.
For Web Syslog
For Web Syslog
This page displays the time and message for User/Firewall/call/WAN/VPN settings. You can
check Enable Web Syslog, specify the type of Syslog and choose the display mode you want.
Later, the event of Syslog with specified type will be shown for your reference.
Available settings are explained as follows:
Item
Enable Web Syslog
Syslog Type
Export
Refresh
Clear
Display Mode
Time
Message
Vigor2762 Series User's Guide
Use the drop down list to choose the protocol that you want
to ping through.
It indicates the IP address of the host.
It indicates the IPv6 address of the host.
Click this button to start route tracing work.
Click this link to remove the result on the window.
Description
Check this box to enable the function of Web Syslog.
Use the drop down list to specify a type of Syslog to be
displayed.
Click this link to save the data as a file.
Click this link to refresh this page manually.
Click this link to clear information on this page.
There are two modes for you to choose.
Stop record when fulls – when the capacity of syslog is full,
the system will stop recording.
Always record the new event – only the newest events will
be recorded by the system.
Display the time of the event occurred.
Display the information for each event.
413