Draytek Vigor2762 series User Manual page 608

Telnet Command:
Telnet Command:
This command allows users to transfer a bridge modem into ADSL router by accessing into
and adjusting specified IP address. Users can access into Web UI of the router to manage the
router through the IP address configured here.
vigbrg cfgip [IP Address]
Syntax Description
Syntax Description
Parameter
IP Address
Example
Example
> vigbrg cfgip 192.168.1.15
> vigbrg cfgip ?
% Vigor Bridge Config IP,
% Now: 192.168.1.15
Telnet Command:
Telnet Command:
This command can display the existed WAN connection status for the modem (change from
ADSL router into bridge modem), including index number, MAC address, Stamp Time, PVC,
VLAN port for Vigor Bridge Function..
Example
Example
> vigbrg wanstatus
Vigor Bridge: Running
WAN mac table:
Index
VLan
Telnet Command:
Telnet Command:
This command can display the existed WLAN connection status for the modem (change from
router into bridge modem), including index number, MAC address, Stamp Time, PVC, VLAN
port for Vigor Bridge Function.
Example
Example
> vigbrg wlanstatus
Vigor Bridge: Running
WAN mac table:
Index
Port
Telnet Command: vlan group
Telnet Command: vlan group
This command allows you to set VLAN group. You can set four VLAN groups. Please run vlan
restart command after you change any settings.
Syntax
Syntax
vlan group id [set/set_ex] [p1/p2/p3/p4/s1/s2/s3/s4
Syntax Description
Syntax Description
Parameter
598
vigbrg cfgip
vigbrg cfgip
Description
It means to type an IP address for users to manage the router.
vigbrg wanstatus
vigbrg wanstatus
MAC Address
Port
vigbrg wlanstatus
vigbrg wlanstatus
MAC Address
Description
Stamp Time PVC
Stamp Time PVC
Vigor2762 Series User's Guide
VLan