Draytek Vigor2762 series User Manual page 638

-l <lan>
-s <ssid>
-m <message>
-u <url>
-f <url>
-e
-d
-i
-c
-x <0/1/2>
-h<0/1>
Example
Example
> wptl -e -p 1 -l 1,2 -s 1 -u http://www.draytek.com
Profile 1 enable ... [OK]
Applied LAN interfaces ... [OK]
Applied WLAN interfaces ... [OK]
Redirect to URL mode ... [OK]
>
Telnet Command:
Telnet Command:
This command allows the user to configure wireless access control settings.
Syntax
Syntax
wl acl enable [ssid1 ssid2 ssid3 ssid4]
wl acl disable [ssid1 ssid2 ssid3 ssid4]
wl acl add [MAC] [ssid1 ssid2 ssid3 ssid4] [isolate]
wl acl del [MAC]
wl acl mode [ssid1 ssid2 ssid3 ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clean
Syntax Description
Syntax Description
Parameter
enable [ssid1 ssid2 ssid3
ssid4]
disable [ssid1 ssid2 ssid3
ssid4]
628
It means to specify the LAN interface for applying the function.
lan1 and lan2: -l 1,2
It means to specify the WLAN interface (SSID1 ~ SSID4) for applying
the function.
Redirect to message.
Redirect to url.
Redirect to url and force the user to click on the button to
proceed.
Enable the profile.
Disable the profile.
Display the content of the profile.
Reset all of the settings.
Change the priority of the profile.
0:none
1:wptl
2:usermgt
Disable(0)/enable(1) redirection of HTTPS.
wl acl
wl acl
Description
It means to enable the settings for SSID1, SSID2, SSID3 and SSID4.
It means to disable the settings for SSID1, SSID2, SSID3 and SSID4.
Vigor2762 Series User's Guide