Ii-1-2-12 Details Page For Ipv6 - Dhcpv6 Client In Wan1/Wan2 - Draytek Vigor2762 series User Manual

II-1-2-12 Details Page for IPv6
II-1-2-12 Details Page for IPv6
DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Available settings are explained as follows:
Item
IAID
WAN Connection
Detection
RIPng Protocol
Bridge Mode
82
– DHCPv6 Client in WAN1/WAN2
– DHCPv6 Client in WAN1/WAN2
Description
Type a number as IAID.
Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Always On, Ping Detect or NS Detect for the
system to execute for WAN detection. With NS Detect
mode, the system will check if network connection is
established or not, like IPv4 ARP Detect. Always On means
no detection will be executed. The network connection will
be on always.

Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.

TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
RIPng (RIP next generation) offers the same functions and
benefits as IPv4 RIP v2.
Enable Bridge Mode - If the function is enabled, the router
will work as a bridge modem.
Enable Firewall – It is available when Bridge Mode is
enabled. When both Bridge Mode and Firewall check boxes
Vigor2762 Series User's Guide