Draytek Vigor2762 series User Manual page 572

Parameter
?
IP address
Example
Example
> srv dhcp startip 192.168.1.53
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
Telnet Command:
Telnet Command:
This command can display general information for the DHCP server, such as IP address, MAC
address, leased time, host ID and so on.
Example
Example
> srv dhcp status
DHCP server: Relay Agent
Default gateway: 192.168.1.1
Index
1
562
Description
It means to display current used start IP address.
It means the IP address that you can specify for the DHCP server as
the starting point.
srv dhcp status
srv dhcp status
IP Address MAC Address
192.168.1.113 00-05-5D-E4-D8-EE
Leased Time HOST ID
17:20:08 A1000351
Vigor2762 Series User's Guide