Draytek Vigor2762 series User Manual page 593

> sys pollbuf on
% Buffer polling is on!
> sys pollbuf off
% Buffer polling is off!
Telnet Command:
Telnet Command:
This command can improve triple play quality.
sys britask [on]
sys britask [off]
Syntax Description
Syntax Description
Parameter
on
off
Example
Example
> sys britask on
% bridge task is ON, now
Telnet Command:
Telnet Command:
This command can set CPE settings for applying in VigorACS.
sys tr069 get [parm] [option]
sys tr069 set [parm] [value]
sys tr069 getnoti [parm]
sys tr069 setnoti [parm] [value]
sys tr069 log
sys tr069 debug [on/off]
sys tr069 save
sys tr069 inform [event code]
sys tr069 port [port num]
sys tr069 cert_auth [on/off]
Syntax Description
Syntax Description
Parameter
get [parm] [option]
set [parm] [value]
getnoti [parm]
setnoti [parm] [value]
log
debug [on/off]
Vigor2762 Series User's Guide
sys britask
sys britask
Description
It means to turn on the bridge task for improving the triple play
quality.
It means to turn off the bridge task.
sys tr069
sys tr069
Description
It means to get parameters for tr-069.
option=<nextlevel>: only gets nextlevel for GetParameterNames.
It means to set parameters for tr-069.
It means to get parameter notification value.
It means to set parameter notification value.
It means to display the TR-069 log.
on: turn on the function of sending debug message to syslog.
off: turn off the function of sending debug message to syslog.
583