Draytek Vigor2762 series User Manual page 493

Telnet Command:
Telnet Command:
This command is used to enable/disable igmp snoop server.
Syntax Syntax
ip igmp_snoop enable
ip igmp_snoop disable
ip igmp_snoop status
ip igmp_snoop txquery [on|off] [v2|v3]
ip igmp_snoop chkleave [on|off]
ip igmp_snoop separate [on|off]
Syntax Description
Syntax Description
Parameter
enable
disable
status
table
txquery [on|off] [v2|v3]
mode [hw/sw]
chkleave [on|off]
separate [on|off]
Example
Example
> ip igmp_snoop enable
% ip igmp snooping [enable|disable|status], IGMP Snooping is
Enabled.
>
Telnet Command:
Telnet Command:
This command is used to enable/disable igmp fast leave.
Syntax
Syntax
ip igmp_fl enable
ip igmp_fl disable
ip igmp_fl status
Syntax Description
Syntax Description
Parameter
enable
disable
status
Example
Example
Vigor2762 Series User's Guide
ip igmp_snoop
ip igmp_snoop
Description
It means to enable proxy server.
It means to disable proxy server.
It means to display current status for proxy server.
Display the whole table of IGMP Snoop configuration.
IGMP query will be sent out to LAN periodically.
Make IGMP snooping work on software or hardware.
Off – Vigor router will drop LEAVE if clients still on the same group.
On – IGMP packets will be separated by NAT/Bridge mode.
ip igmp_fl
ip igmp_fl
Description
Enable IGMP fast leave.
Disable IGMP fast leave.
Display current status of IGMP Fast Leave.
483