Draytek Vigor2762 series User Manual page 643

Parameter
wl wpa
Example
Example
> wl wpa 1
>
Telnet Command:
Telnet Command:
This command allows users to set WMM for wireless connection. It defines the priority levels
for four access categories derived from 802.1d (prioritization tabs).
wl wmm ap QueIdx Aifsn Cwmin Cwmax Txop ACM
wl wmm bss QueIdx Aifsn Cwmin Cwmax Txop ACM
wl wmm ack Que0_Ack Que1_Ack Que2_Ack Que3_Ack
wl wmm enable SSID0 SSID1 SSID2 SSID3
wl wmm apsd value
wl wmm show
Syntax Description
Syntax Description
Parameter
ap
bss
ack
enable
Apsd [value]
show
QueIdx
Aifsn
Cwmin/ Cwmax
Txop
ACM
Example
Example
Vigor2762 Series User's Guide
Description
Type 1/2/3 to represent different WPA modes.
1 – means WPA+WPA2
2 – means WPA2 Only
3 – means WPA Only
wl wmm
wl wmm
Description
It means to set WMM for access point.
It means to set WMM for wireless clients.
It means to map to the Ack policy settings of AP WMM.
It means to enable the WMM for each SSID.
0: disable
1: enable
It means to enable / disable the ASPD(automatic power-save
delivery) function.
0: disable
1: enable
It displays current status of WMM.
It means the number of the queue which the WMM settings will be
applied to. There are four queues, best effort, background, voice,
and video.
It controls how long the client waits for each data transmission.
CWMin means contention Window-Min and CWMax means
contention Window-Max. Specify the value ranging from 1 to 15.
It means transmission opportunity. Specify the value ranging from
0 to 65535.
It can restrict stations from using specific category class if it is
enabled.
0: disable
1: enable
633