Draytek Vigor2762 series User Manual page 568

start
IP address
cnt
IP counts
status
add
del
MAC Addr
all/ALL
Example
Example
Vigor> ip route add 192.168.1.56 255.255.255.0 192.168.1.12 3
default
Vigor> srv dhcp public status
Index
Telnet Command:
Telnet Command:
This command allows users to set Primary IP Address for DNS Server in LAN.
srv dhcp dns1 [?]
srv dhcp dns1 [DNS IP address]
Syntax Description
Syntax Description
Parameter
?
DNS IP address
Example
Example
> srv dhcp dns1 168.95.1.1
% srv dhcp dns1 <DNS IP address>
% Now: 168.95.1.1
(IP Routed Subnet dns same as NAT Subnet dns)
Telnet Command:
Telnet Command:
This command allows users to set Secondary IP Address for DNS Server in LAN.
srv dhcp dns2 [?]
srv dhcp dns2 [DNS IP address]
Syntax Description
Syntax Description
558
It means the starting point of the IP address pool for the DHCP
server.
It means to specify an IP address as the starting point in the IP
address pool.
It means the IP count number.
It means to specify the number of IP addresses in the pool. The
maximum is 10.
It means the execution result of this command.
It means creating a list of hosts to be assigned.
It means removing the selected MAC address.
It means to specify MAC Address of the host.
It means all of the MAC addresses.
MAC Address
srv dhcp dns1
srv dhcp dns1
Description
It means to display current IP address of DNS 1 for the DHCP
server.
It means the IP address that you want to use as DNS1.
Note: The IP Routed Subnet DNS must be the same as NAT Subnet
DNS).
srv dhcp dns2
srv dhcp dns2
Vigor2762 Series User's Guide