Draytek Vigor2762 series User Manual page 596

License and Signature download interface setting:
licifno [AUTO/WAN#]
Ex: licifno wan1
Download interface is "auto-selected" now.
Telnet Command:
Telnet Command:
This command is used for RD debug.
sys diag_log [status| enable| disable| flush| lineno [w] | level [x] | feature [on|off] [y]|
log]
Syntax Description
Syntax Description
Parameter
status
enable
disable
flush
lineno [w]
level[x]
feature [on/off][y]
voip_feature [on/off]
[vf_name]
log
Example
Example
> sys diag_log status
Status:
diag_log is Enabled.
lineno : 10000.
level : 3.
Enabled feature: SYS DSL
> sys diag_log log
0:00:02
0:00:02
0:00:02
0:00:02
VDSL!!
0:00:02
0:00:02
586
sys diag_log
sys diag_log
Description
It means to show the status of diagnostic log.
It means to enable the function of diag_log.
It means to disenable the function of diag_log.
It means the flush log buffer.
It means the total lines for displaying message.
w - Available value ranges from 100 to 50000.
It determines the level of data displayed.
x – Available value ranges from 0 to 12. The larger the number is,
the detailed the data is displayed.
It is used to specify the function of the log. Supported features
include SYS and DSL (Case-Insensitive). Default setting is "on" for
"DSL".
It means VoIP feature. Type on to enable the feature or type off to
disable the feature.
vf_name: available settings include DRVTAPI, DRVVMMC, DRVMPS,
DRVFXO, DRVHAL, PSMPHONE, PSMSUPP, PSM, FXO, PSMISDN,
DTMFPSER, CALLERID (Case-Insensitive).
It means the dump log buffer.
[DSL] Current modem firmware: AnnexA_548006_544401
[DSL] Modem firmware feature: 5, ADSL_A, VDSL2
[DSL] xtseCfg=04 00 04 00 0c 01 00 07
[DSL] don't have last showtime mode!! set next mode to
[DSL] Status has changed: Stopped(0) -> FwWait(3)
[DSL] Status has changed: FwWait(3) -> Starting(1)
Vigor2762 Series User's Guide