Draytek Vigor2762 series User Manual page 453

4. Edit the profile.
a. Enter description of this profile.
b. Enter VPN Server's IP in Server.
c. Enter Port as the port which VPN server uses for SSL VPN; for Vigor Routers, it is
d. Tap SAVE to save the profile or "<" to cancel.
Info
5. Tap the profile bar to establish SSL VPN tunnel.
6. Enter Username and Password, then tap Dial.
Vigor2762 Series User's Guide
443 by default.
Installation of relevant Root CA is required to enable server certificate
authentication.
If you check "Use default gateway on remote network", all the traffic of this
smart device will be forwarded to the remote gateway.
443