Draytek Vigor2762 series User Manual page 513

-V
-L <time/infinity>:
-P <time/infinity>
-r [num]
-R
-u
Example
Example
> ip6 radvd LAN1 -v
% [LAN1] setting !
% Status
% RDNSS
% Default Lifetime : 1800 seconds
% min interval time: 200 seconds
% MAX interval time: 600 seconds
% Hop limit
% MTU
% Reachable time
% Retransmit time
% Preference
% Prefix valid lifetime
% Prefix preferred lifetime : 604800
Telnet Command:
Telnet Command:
This command allows you to manage the settings for access list.
ip6 mngt list
ip6 mngt list [add<index> <prefix> <prefix-length>|remove <index>|flush]
ip6 mngt status
ip6 mngt [http|telnet|ping|https|ssh] [on|off]
Syntax Description
Syntax Description
Parameter
list
status
add
index
prefix
prefix-length
remove
flush
http|telnet|ping|https|ssh
Vigor2762 Series User's Guide
It means to show the RADVD configuration.
Set prefix valid lifetime.
Set prefix preferred lifetime.
Make RADVD test for item [num].
num - 0-default, 121:logo 121, 124:logo 124.
Reload Config and send RA for subnets.
View MTU on all interfaces.
: Enable
: Enable
: 64
: auto
: 0
: 0
: Medium
ip6 mngt
ip6 mngt
Description
It means to show the setting information of the access list.
It means to show the status of IPv6 management.
It means to add an IPv6 address which can be used to execute
management through Internet.
It means the number (1, 2 and 3) allowed to be configured for IPv6
management.
It means to type the IPv6 address which will be used for accessing
Internet.
It means to type a fixed value as the length of the prefix.
It means to remove (delete) the specified index number with IPv6
settings.
It means to clear the IPv6 access table.
These protocols are used for accessing Internet.
: 2592000
503