Ii-2-1 General Setup - Draytek Vigor2762 series User Manual

Adsl2/2+ and vdsl2 router

Hide thumbs Also See for Vigor2762 series:

Table of Contents

Web User Interface

II-2-1 General Setup

This page provides you the general settings for LAN. Click LAN to open the LAN settings

page and choose General Setup.

There are several subnets provided by the router which allow users to divide groups into

different subnets (LAN1 – LAN6). In addition, different subnets can link for each other by

configuring Inter-LAN Routing. At present, LAN1 setting is fixed with NAT mode only. LAN2 –

LAN6 can be operated under NAT or Route mode. IP Routed Subnet can be operated under

Available settings are explained as follows:

General Setup

Allow to configure settings for each subnet respectively.

Index - Display all of the LAN items.

Status- Basically, LAN1 status is enabled in default. LAN2 –

LAN6 and IP Routed Subnet can be observed by checking the

box of Status.

DHCP- LAN1 is configured with DHCP in default. If required,

please check the DHCP box for each LAN.

IP Address - Display the IP address for each LAN item. Such

information is set in default and you can not modify it.

Details Page - Click it to access into the setting page. Each

LAN will have different LAN configuration page. Each LAN

must be configured in different subnet.

IPv6 – Click it to access into the settings page of IPv6.

DHCP packets can be processed by adding option number

and data information when such function is enabled.

Vigor2762 Series User's Guide

Show Quick Links

Table of Contents