Draytek Vigor2762 series User Manual page 651

-e
AP_INDEX
CLASS
-d
Example
Example
> appqos enable 1
APP QoS set to Enable.
> appqos traceable -e 68 2
TELNET: ENABLED, QoS Class 2.
Telnet Command: nand bad /nand usage
Telnet Command: nand bad /nand usage
"NAND usage" is used to display NAND Flash usage; "nand bad" is used to display NAND Flash
bad blocks.
nand bad
nand usage
Example Example
>nand usage
Show NAND Flash Usage:
Partition
cfg
bin_web
cfg-bak
bin_web-bak 33554432
> nand bad
Show NAND Flash Bad Blocks:
Block
1020
1021
1022
1023
Vigor2762 Series User's Guide
Use "appqos traceable –v" to display all of the traceable APS with
speficed index number.
Use "appqos untraceable –v" to display all of the untraceable APS
with speficed index number.
It menas to enable QoS for application(s) and assign QoS class.
Each index number represents one application.
Index number: 50, 51, 52, 53, 54, 58, 60, 62, 63, 64, 65, 66, 68 are
used for 13 traceabel APPs.
Index number: 0~49, 55~59, 61, 67, 69, and 70~123 are used for
125 untraceable AP.
Specifies the QoS class of the application, from 1 to 4
1:Class 1, 2:Class 2, 3:Class 3, 4:Other Class
It means to disable QoS for application(s).
Total
4194304
33554432
4194304
Address Partition
0x07f80000 unused
0x07fa0000 unused
0x07fc0000 unused
0x07fe0000 unused
Used Available
7920
11869493 21684939
7920 4186384
11869493 21684939
Use%
4186384
35%
0%
35%
0%
641