Draytek Vigor2762 series User Manual page 465

Bin SNR
dB
--- ----- ---- -- - --- ----- ---- -- - --- ----- ---- -- - --- ----- ---- --
--- ----- ---- -- - --- ----- ---- -- - --- ----- ---- -- - --- ----- ---- --
Bin SNR
dB
>
Telnet Command:
Telnet Command:
This command allows you to configure DSL line feature. This feature is depended on modem
firmware. For G.Vector feature, modem firmware needs to support VDSL2 G.Vector.
adsl optn FUNC [us/ds/bi [value/on/off]
Syntax Description Syntax Description
Parameter
FUNC
us/ds/bi
value
on/off
Example Example
> adsl optn status
trellis
bitswap
sra
retx
aelem
G.Vector
Telnet Command:
Telnet Command:
This command can save the configuration into FLASH with a file format of cfg.
Example
Example
> adsl savecfg
% Xdsl Cfg Save OK!
Telnet Command:
Telnet Command:
This command allows you to configure user-defined CPE vendor ID.
Vigor2762 Series User's Guide
Gain Bi - Bin SNR Gain Bi - Bin
.1dB ts dB .1dB ts
Gain Bi - Bin SNR Gain Bi - Bin
.1dB ts dB .1dB ts
adsl optn
adsl optn
Description
Available functions include:
'trellis', 'bitswap', 'sra', 'retx', 'aelem', 'status', 'g.vector', 'default'.
default: Set all features back to default settings.
us: means "upstream"
ds: means "downstream"
bi: means "bidirection"
The values for different functions change slightly.
bitswap=0~2, sra=0,2,3,4.
Type "on" for enabling such function.
Type "off" for disabling such function.
Functions of 'aelem' and 'g.vector' are only on/off.
[US] = ON, [DS] =
[US] =
[0: default(ON), 1: ON, 2: OFF]
[US] =
[0: default(=3), 2: OFF, 3: ON , 4: DYNAMIC_SOS]
[US] =
ON
ON
adsl savecfg
adsl savecfg
adsl vendorid
adsl vendorid
SNR Gain Bi - Bin
dB .1dB ts
SNR Gain Bi - Bin
dB .1dB ts
ON.
0, [DS] = 0.
0, [DS] = 0.
ON, [DS] = ON.
SNR Gain Bi
dB .1dB ts
SNR Gain Bi
dB .1dB ts
455