Draytek Vigor2762 series User Manual page 488

Leased Elapsed T1
Leased Elapsed T2
Telnet Command:
Telnet Command:
This command allows users to ping IP address of WAN1/WAN2 for verifying if the WAN
connection is OK or not.
Syntax
Syntax
ip ping [IP address] [WAN1/WAN2]
Syntax Description
Syntax Description
Parameter
IP address
WAN1/WAN2
Example
Example
>ip ping 172.16.3.229 WAN1
Pinging 172.16.3.229 with 64 bytes of Data:
Receive reply from 172.16.3.229, time=0ms
Receive reply from 172.16.3.229, time=0ms
Receive reply from 172.16.3.229, time=0ms
Packets: Sent = 5, Received = 5, Lost = 0 <0% loss>
Telnet Command:
Telnet Command:
This command allows users to trace the routes from the router to the host.
ip tracert [Host/IP address] [WAN1/WAN2/WAN3/WAN4/WAN5] [Udp/Icmp]
Syntax Description
Syntax Description
Parameter
IP address
WAN1/WAN2
Udp/Icmp
Example
Example
>ip tracert 22.128.2.62 WAN1
Traceroute to 22.128.2.62, 30 hops max
1 172.16.3.7
2 172.16.1.2
3 Request Time out.
4 168.95.90.66
5 211.22.38.134
6 220.128.2.62
Trace complete
Telnet Command:
Telnet Command:
This command allows users to access specified device by telnet.
478
: 129594
: 226794
ip ping
ip ping
Description
It means the WAN IP address.
It means the WAN interface that the above IP address passes
through.
ip tracert
ip tracert
Description
The target IP address.
It means the WAN port that the above IP address passes
through.
The UDP or ICMP.
10ms
10ms
50ms
50ms
50ms
ip telnet
ip telnet
Vigor2762 Series User's Guide