Draytek Vigor2762 series User Manual page 267

Adsl2/2+ and vdsl2 router

Hide thumbs Also See for Vigor2762 series:

Table of Contents

A dialog box will be popped up. Choose Range Address as Address Type by using the

drop down list. Type 192.168.1.10 in the field of Start IP, and type 192.168.1.20 in the

field of End IP. Then, click OK to save the settings. The computers within the range

can access into the Internet.

Now, check the content of Source IP is correct or not. The action for Filter shall be

set with Pass Immediately. Then, click OK to save the settings.

Vigor2762 Series User's Guide

Show Quick Links

Table of Contents