Draytek Vigor2762 series User Manual page 502

-p <profile name>
-r
Example
Example
> ip dnsforward -i 1 -n ftp.drayTek.com
% Configure Set1's DomainName:ftp.drayTek.com
> ip dnsforward -i 1 -a 172.16.1.1
% Configure Set1's IP:172.16.1.1
> ip dnsforward -i 1 -l
% Idx: 1
% State: Disable
% Profile: test
% Domain Name: ftp.drayTek.com
% DNS Server IP: 172.16.1.1
>
Telnet Command:
Telnet Command:
This command allows users to set the IPv6 address for your router.
ip6 addr -s [prefix] [prefix-length] [LAN|WAN1|WAN2|iface#]
ip6 addr -d [prefix] [prefix-length] [LAN|WAN1|WAN2|iface#]
ip6 addr -a [LAN|WAN1|WAN2|iface#]
Syntax Description
Syntax Description
Parameter
-s
-d
-a
-u
prefix
prefix-length
LAN|WAN1|WAN2|iface#
Example
Example
> ip6 addr -a
LAN
Unicast Address:
FE80::250:7FFF:FE00:0/64 (Link)
Multicast Address:
FF02::2
FF02::1:FF00:0
FF02::1
Telnet Command:
Telnet Command:
This command is used to configure option-request settings for DHCPv6 client.
ip6 dhcp req_opt [LAN|WAN1|WAN2|iface#] [-<command> <parameter>| ... ]
492
Set profile name for LAN DNS.
Reset the settings for selected profile.
ip6 addr
ip6 addr
Description
It means to add a static ipv6 address.
It means to delete an ipv6 address.
It means to show current address(es) status.
It means to show only unicast addresses.
It means to type the prefix number of IPv6 address.
It means to type a fixed value as the length of the prefix.
It means to specify LAN or WAN interface for such address.
ip6 dhcp req_opt
ip6 dhcp req_opt
Vigor2762 Series User's Guide