Draytek Vigor2762 series User Manual page 530

Example Example
> mngt sshport 23
% Set ssh port to 23 done.
Telnet Command:
Telnet Command:
This command is used to pass or block Ping from LAN PC to the internet.
mngt noping [on]
mngt noping [off]
mngt noping [viewlog]
mngt noping [clearlog]
Syntax Description
Syntax Description
Parameter
on
off
viewlog
clearlog
Example
Example
> mngt noping off
No Ping Packet Out is OFF!!
520
mngt noping
mngt noping
Description
All PING packets will be forwarded from LAN PC to Internet.
All PING packets will be blocked from LAN PC to Internet.
It means to display a log of ping action, including source MAC and
source IP.
It means to clear the log of ping action.
Vigor2762 Series User's Guide