Draytek Vigor2762 series User Manual page 460

CO ITU Version[0]
DSLAM CHIPSET VENDOR
>
Telnet Command: adsl ppp
Telnet Command: adsl ppp
This command can set the Internet Access mode for the router.
Syntax
Syntax
adsl ppp [ ? | pvc_no vci vpi Encap Proto modu acqIP idle [Username Password]
Syntax Description
Syntax Description
Parameter
Parameter
?
pvc_no
Encap
Proto
Modu
acqIP
idle
Username
Password
You have to reboot the system when you set it on Route mode.
450
: 00000000 CO ITU Version[1]
: < ----- >
Description
Description
Display the command syntax of "adsl ppp".
It means the PVC number and the adjustable range is from
0 (Channel-1) to 7(Channel-8).
Different numbers represent different modes.
0 : VC_MUX,
1: LLC/SNAP,
2: LLC_Bridge,
3: LLC_Route,
4: VCMUX_Bridge
5: VCMUX_Route,
6: IPoE.
It means the protocol used to connect Internet. Different
numbers represent different protocols.
0: PPPoA,
1: PPPoE,
2: MPoA.
0: T1.413,
2: G.dmt,
4: Multi,
5: ADSL2,
7:ADSL2_AnnexM
8:ADSL2+
14:ADSL2+_AnnexM.
It means the way to acquire IP address. Type the number
to determine the IP address by specifying or assigned
dynamically by DHCP server.
0 : fix_ip,
1: dhcp_client/PPPoE/PPPoA.(acquire IP method)
Type number to determine the network connection will be
kept for always or idle after a certain time.
-1: always on, else idle timeout secs. Only for
PPPoE/PPPoA.
This parameter is used only for PPPoE/PPPoA.
This parameter is used only for PPPoE/PPPoA.
: 00000000
Vigor2762 Series User's Guide