Draytek Vigor2762 series User Manual page 142

Available settings are explained as follows:
Item
Private IP
Choose IP
DMZ Host for WAN2, or WAN3 is slightly different with WAN1. Active True IP selection is
available for WAN1 only.
See the following figure.
132
Description
Choose Private IP first.
Enter the private IP address of the DMZ host, or click Choose
PC to select one.
Click this button and then a window will automatically pop
up, as depicted below. The window consists of a list of
private IP addresses of all hosts in your LAN network. Select
one private IP address in the list to be the DMZ host.
When you have selected one private IP from the above
dialog, the IP address will be shown on the screen. Click OK
to save the setting.
Vigor2762 Series User's Guide