Draytek Vigor2762 series User Manual page 343

Prioritize
Limited_bandwidth Ratio
Info
Edit the Class Rule for QoS
Edit the Class Rule for QoS
1. The first three (Class 1 to Class 3) class rules can be adjusted for your necessity. To
add, edit or delete the class rule, please click the Edit link of that one.
2. After you click the Edit link, you will see the following page. Now you can define the
name for that Class. In this case, "Test" is used as the name of Class Index #1.
Vigor2762 Series User's Guide
are great in ADSL2+ environment. For the download speed
might be impacted by the uploading TCP ACK, you can
check this box to push ACK of upload faster to speed the
network traffic.
The ratio typed here is reserved for limited bandwidth of
UDP application.
The rate of outbound/inbound must be smaller than the real bandwidth to
ensure correct calculation of QoS. It is suggested to set the bandwidth
value for inbound/outbound as 80% - 85% of physical network speed
provided by ISP to maximize the QoS performance.
333