Draytek Vigor2762 series User Manual page 466

adsl vendorid [status/on/off/ set vid0 vid1]
Syntax Description Syntax Description
Parameter
status
on
off
set vid0 vid1
Example
Example
> adsl vendorid status
% User define CPE Vendor ID is OFF
% vid0:vid1 = 0x00fe7244:79612f21
> adsl vendorid on set vid0 vid1
% User define CPE Vendor ID is ON
Telnet Command:
Telnet Command:
This command can set QoS parameter for ATM.
adsl atm pcr [pvc_no][PCR][max][status]
adsl atm scr [pvc_no][SCR][status]
adsl atm mbs [pvc_no][MBS][status]
adsl atm status
Syntax Description Syntax Description
Parameter
pvc_no
PCR
max
SCR
MBS
status
Example
Example
> adsl atm pcr 1
% PCR is
> adsl atm pcr status
pvc
---------------------------
0
1
2
456
Description
Display current status of user-defined vendor ID.
Enable the user-defined function.
Disable the user-defined function.
It means to set user-defined vendor ID with vid0 and vid1.
The vendor ID shall be set with HEX format, ex: 00fe7244:
79612f21.
adsl atm
adsl atm
Description
It means pvc number and must be between 0(Channel 1) to
7(Channel 8).
It means Peak Cell Rate for upstream.
The range for the number is "1" to "2539".
Get the highest speed for the upstream.
Mean Sustainable Cell Rate.
The range for the number is "1" to "2539".
Maximum Burst Size.
The range for the number is "1" to "2539".
Display PCR/SCR/MBS setting.
200 max
0 for pvc 1.
channel PCR
1 0
2 0
3 0
Vigor2762 Series User's Guide