Draytek Vigor2762 series User Manual page 468

G.994.1 provider code
G.994.1 vendor info
System vendor ID
System country code
System provider code
System vendor info
Version number
Version number(16 octets)
Self-test result
Transmission mode capability
>
Telnet Command: bpa
Telnet Command: bpa
This command allows to configure a network setting specified for Australia's ISP.
Syntax Syntax
bpa m [-<command> <parameter> | ... ]
Syntax Description
Syntax Description
Parameter
m
-a <enable>
-n <UserName>
-p <PassWord>
-s <select>
-l <List>
Example
Example
> bpa 1 -a 1 -n testUser -p testPassword -s 4
> bpa -l
-------index: 1 active------
UserName[1]: testUser
PassWord[1]: testPassword
ServerIP[1]:4
-------index: 2 inactive------
UserName[2]:
PassWord[2]:
ServerIP[2]:0
>
Telnet Command:
Telnet Command:
458
Description
Available settings are 1 and 2.
1/0 to enable/disable this entry
contact UserName(max. 24 characters)
contact PassWord (max. 24 characters)
It means to specify an IP address for Server.
0 : no selection.
1 : NSW(61.9.192.13)
2 : QLD(61.9.208.13),
3 : VIC(61.9.128.13)
4 : SA(61.9.224.13),
5 : WA(61.9.240.13)
List all settings configured.
csm appe prof
csm appe prof
: IFTN
: 0X5444
: 0XB5004946544E0000
: 0XB500
: IFTN
: 0X000
: 3.8.2_RC4a_STD
: 0X332E382E325F524334615F5354440000
: PASS
: 0X40004004C010400
Vigor2762 Series User's Guide