Draytek Vigor2762 series User Manual page 637

Adsl2/2+ and vdsl2 router
Hide thumbs Also See for Vigor2762 series:
Table of Contents

Advertisement

Syntax Description
Syntax Description
Parameter
-w [number]
-I [Host/IP address]
-s [base_size]
-d [decrease size]
-c [count]
Example
Example
> wan detect_mtu -w 2 -i 8.8.8.8 -s 1500 -d 30 -c 10
detecting
mtu size:1470!!!
Telnet Command:
Telnet Command:
This command allows you to run a WAN MTU Discovery. The user can specify an IPv6 target
to ping and find the suitable MTU size of the WAN interface.
Syntax
Syntax
wan detect_mtu6 –w [number] –i [IPv6 address] –s [base_size]
Syntax Description
Syntax Description
Parameter
-w [number]
-I [IPv6 address]
-s [base_size]
Example
Example
> wan detect_mtu6 -w 1 -i 2404:6800:4008:c06::5e -s 1500
>
Telnet Command:
Telnet Command:
This command is used to specify an URL for accessing into or display a message when a
wireless user connects to Internet through this router.
Syntax
Syntax
wptl -p <profile> [-l <lan>] [-s <ssid>] [-m <message> | -u <url> | -f <url>] [-e | -d]
Syntax Description
Syntax Description
Parameter
profile
Vigor2762 Series User's Guide
Description
Specify the WAN interface.
Value: Type the number of WAN interface. 1: WAN1; 2:WAN2....and
etc.
Specify the IPv4 target to detect. If can be an IPv4 address or
domain name.
Host/IP address: Type the IP address/domain name of the target.
Set the MTU size base for Discovery.
base_size: Available setting is 1000 ~ 1500.
Set the MTU size to decrease between detections.
decrease size: Available setting is 1 ~ 100.
Set the maximum times of ping failure during a Discovery.
count: Available settings are 1 ~ 10. Default value is 3.
mtu size:1500!!!
wan
detect_mtu6
wan
detect_mtu6
Description
Specify the WAN interface
number: Type the number of WAN interface. 1: WAN1;
2:WAN2....and etc.
Specify the IPv6 target to detect. It must be an IPv6 IP address.
IPv6 address: Type the IPv6 address of the target.
Specify the size of MTU.
base_size: Available setting is 1000 ~ 1500.
wptl
wptl
Description
It means to specify one of the SSID profiles for configuration.
The range is from 1 to 4.
627

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents