Draytek Vigor2762 series User Manual page 123

Item
Enable IPv6
WAN Primary Interface
Static IPv6 Address
Unique Local Address
(ULA) configuration
DNS Server IPv6 Address
Management
DHCPv6 Server
Configuration
Vigor2762 Series User's Guide
Description
Check the box to enable the configuration of LAN 1 IPv6
Setup.
Use the drop down list to specify a WAN interface for IPv6.
IPv6 Address –Type static IPv6 address for LAN.
Prefix Length – Type the fixed value for prefix length.
Add – Click it to add a new entry.
Delete – Click it to remove an existed entry.
Such feature is used for the host without assigned IPv6
address to obtain IPv6 address automatically or have an IPv6
address specified manually via ULA configuration. It is
convenient for communication among different subnets.
Auto ULA Prefix – The system will generate the required
IPv6 address.
Manually ULA Prefix – A user can type the ULA IPv6 address
manually.
Primary DNS Sever – Type the IPv6 address for Primary DNS
server.
Secondary DNS Server –Type another IPv6 address for DNS
server if required.
Host under LAN can be assigned IP address from Vigor router
via the following method.

SLAAC(stateless) – The IP address (with Prefix) of the
host shall be formed according to RA transmitted by
Vigor router.

DHCPv6(stateful) - The IP address of the host shall be
assigned after communicating with DHCPv6 server for
answering the request of client.

Off – No IP address is assigned.
Other Option (O-bit) – Check this box to enable the O-bit
for obtaining additional information (e.g., DNS) from
DHCPv6.
Disable Server –Click it to disable DHCPv6 server.
Enable Server –Click it to enable DHCPv6 server. DHCPv6
Server could assign IPv6 address to PC according to the
Start/End IPv6 address configuration.
Auto IPv6 range – IPv6 address(es) will be assigned by
DHCPv6 server automatically.
Start IPv6 Address / End IPv6 Address –Type the start and
end address for IPv6 server.
113