Draytek Vigor2762 series User Manual page 610

Example
Example
> vlan pri 1 2
VLAN1: Priority=2
Telnet Command: vlan restart
Telnet Command: vlan restart
This command can make VLAN settings restarted with newest configuration.
Syntax
Syntax
vlan restart
Example
Example
> vlan restart ?
VLAN restarts!!!
Telnet Command: vlan status
Telnet Command: vlan status
This command display current status for VLAN.
Syntax
Syntax
vlan status
Example
Example
> vlan status
VLAN
------------------------------------------------------
VLAN Enable VID
------------------------------------------------------
0
1
2
3
4
5
6
7
------------------------------------------------------
Note: they are only untag for s1/s2/s3/s4, but they can join tag
vlan with lan
ports.
Permit untagged device in P1 to access router: ON.
Telnet Command: vlan subnet
Telnet Command: vlan subnet
This command is used to configure the LAN interface used by the VLAN group.
Syntax
Syntax
vlan subnet group_id [1/2/3/4]
Syntax Description
Syntax Description
600
pri_no=0 ~7 (from none to highest priority).
is Enable :
Pri p1 p2 p3 p4 s1 s2 s3 s4
OFF 0 0
OFF 0 2
OFF 0 0
OFF 0 0 V
OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
subnet
1:LAN1
1:LAN1
1:LAN1
V V 1:LAN1
1:LAN1
1:LAN1
1:LAN1
1:LAN1
Vigor2762 Series User's Guide