Draytek Vigor2762 series User Manual page 523

Parameter
-r
-e
-f
-b
- i [IP address]
-p[value]
-t [value]
Example
Example
>ipf flowtrack set -r
Refresh the flowstate ok
> ipf flowtrack view -f
Start to show the flowtrack sessions state:
ORIGIN>>
REPLY >>
ORIGIN>>
REPLY >>
ORIGIN>>
REPLY >>
End to show the flowtrack sessions state
Telnet Command: Log
Telnet Command: Log
This command allows users to view log for WAN interface such as call log, IP filter log, flush
log buffer, etc.
log [-cfhiptwx?] [-F a| c | f | w]
Syntax Description
Syntax Description
Parameter
-c
-f
-F
Vigor2762 Series User's Guide
Description
It means to refresh the flowtrack.
It means to enable or disable the flowtrack.
0: Disable
1: Enable
It means to show the sessions state of flowtrack. If you do not
specify any IP address, then all the session state of flowtrack will
be displayed.
It means to show all of IP sessions state.
It means to specify IP address (e.g,, -i 192.168.2.55).
It means to type a port number (e.g., -p 1024).
Available settings are 0 ~ 65535.
It means to specify a protocol (e.g., -t tcp).
Available settings include:
tcp
udp
icmp
192.168.1.11:59939 ->
8.8.8.8:
proto=17, age=93023180(3920), flag=203
192.168.1.11:15073 ->
8.8.8.8:
proto=17, age=93025100(2000), flag=203
192.168.1.11: 7247 ->
8.8.8.8:
proto=17, age=93020100(7000), flag=203
Description
It means to show the latest call log.
It means to show the IP filter log.
It means to show the flush log buffer.
a: flush all logs
c: flush the call log
8.8.8.8:
53 -> 192.168.1.11:59939 ,ifno=3
8.8.8.8:
53 -> 192.168.1.11:15073 ,ifno=3
8.8.8.8:
53 -> 192.168.1.11: 7247 ,ifno=3
53 ,ifno=0
53 ,ifno=0
53 ,ifno=0
513