Draytek Vigor2762 series User Manual page 602

This command can enable UPnP function.
Example Example
>upnp on
UPNP start.
Telnet Command:
Telnet Command:
This command can display IGD NAT status.
Example
Example
> upnp nat ?
******************
((0))
InternalClient >>192.168.1.10<<, RemoteHost >>0.0.0.0<<
InternalPort >>21<<, ExternalPort >>21<<
PortMapProtocol >>TCP<<
The tmpvirtual server index >>0<<
PortMapLeaseDuration >>0<<, PortMapEnabled >>0<<
Ftp Example [MICROSOFT]
((1))
InternalClient >>0.0.0.0<<, RemoteHost >>0.0.0.0<<
InternalPort >>0<<, ExternalPort >>0<<
PortMapProtocol >><NULL><<
The tmpvirtual server index >>0<<
PortMapLeaseDuration >>0<<, PortMapEnabled >>0<<
PortMapProtocol >><NULL><<
The tmpvirtual server index >>0<<
PortMapLeaseDuration >>0<<, PortMapEnabled >>0<<
0<<
--- MORE ---
---
Telnet Command:
Telnet Command:
This command can display the information of the UPnP service. UPnP service must be
enabled first.
Example
Example
> upnp on
UPNP start.
> upnp service
>>>>> SERVICE TABLE1 <<<<<
serviceType urn:schemas-microsoft-com:service:OSInfo:1
serviceId
SCPDURL
controlURL
eventURL
UDN
592
upnp nat
upnp nat
IGD NAT Status
['q': Quit, 'Enter': New Lines, 'Space Bar': Next Page]
upnp service
upnp service
urn:microsoft-com:serviceId:OSInfo1
/upnp/OSInfo.xml
/OSInfo1
/OSInfoEvent1
uuid:774e9bbe-7386-4128-b627-001daa843464
****************
Vigor2762 Series User's Guide