Draytek Vigor2762 series User Manual page 518

-M [APPE_NO]
-U [URL_NO]
-W [WEB_NO]
-D[ DNS_NO]
-g [VALUE]
-a [AD_SET]
-f [VALUE]
-E [VALUE]
-F [VALUE]
-Q [VALUE]
Example
Example
> ipf set -c 1
Setting saved.
> ipf set -d 2
Setting saved.
> ipf set -v
Call Filter: Enable (Start Filter Set = 1)
Data Filter: Enable (Start Filter Set = 2)
Log Flag
Actions for packet not matching any rule:
Pass or Block
CodePage
Max Sessions Limit: 60000
Current Sessions
Mac Bind IP
QOS Class
APP Enforcement
URL Content Filter: None
Load-Balance policy : Auto-select
--------------------------------------------------------------
CodePage
Window size
Session timeout
DrayTek Banner
508
setting is disabled.
It means to configure APPE for the packets not matching with any
rule, e.g., -M 1
Type "0" to let all the packets pass;
Type "1" to block all the packets.
It means to configure URL content filter for the packets not
matching with any rule, e.g., -U 1
Type "0" to let all the packets pass;
Type "1" to block all the packets.
Setup WEB Content Filter for packet not matching any rule.
Setup DNS Filter for packet not matching any rule.
Setup DNS Filter syslog.
Type "0" to disable the function.
Type "1" to enable the function.
It means to configure the advanced settings.
It means to accept large incoming fragmented UDP or ICMP
packets.
It means to set the maximum count (0 ~ 60000) for session
limitation.
It means to configure the load-balance policy.
It means to set the QoS class.
#set call filter start from set 1
#set data filter start from set 2
: None
: Pass
: ANSI(1252)-Latin I
: 0
: Non-Strict
: None
: None
: ANSI(1252)-Latin I
: 65535
: 1440
: Enable
Vigor2762 Series User's Guide