Draytek Vigor2762 series User Manual page 579

1.
%% Status: Disable
%% Comment:
%% Private IP address: 0.0.0.0
Index
*****************************************************************
%% Status: Disable
%% Comment:
%% Private IP address: 0.0.0.0
Index
*****************************************************************
>
Telnet Command:
Telnet Command:
This command allows users to set port redirection table for NAT server.
srv nat portmap add [idx][serv name][proto][pub port][pri ip][pri port][wan1/wan2]
srv nat portmap del [idx]
srv nat portmap disable [idx]
srv nat portmap enable [idx] [proto]
srv nat portmap flush
srv nat portmap table
Syntax Description Syntax Description
Parameter
Add[idx]
serv name
proto
pub port
pri ip
pri port
wan1/wan2
del [idx]
disable [idx]
enable [idx]
flush
table
Example
Example
> srv nat portmap add 1 game tcp 80 192.168.1.11 100 wan1
> srv nat portmap table
Vigor2762 Series User's Guide
TCP 23
Protocal Start Port
Protocal Start Port
srv nat portmap
srv nat portmap
Description
It means to add a new port redirection table with an index
number. Available index number is from 1 to 10.
It means to type one name as service name.
It means to specify TCP or UDP as the protocol.
It means to specify which port can be redirected to the specified
Private IP and Port of the internal host.
It means to specify the private IP address of the internal host
providing the service.
It means to specify the private port number of the service offered
by the internal host.
It means to specify WAN interface for the port redirection.
It means to remove the selected port redirection setting.
It means to inactivate the selected port redirection setting.
It means to activate the selected port redirection setting.
It means to clear all the port mapping settings.
It means to display Port Redirection Configuration Table.
83
End Port
End Port
569