Draytek Vigor2762 series User Manual page 571

Telnet Command:
Telnet Command:
This command allows users to specify IP counts for DHCP server.
srv dhcp ipcnt [?]
srv dhcp ipcnt [IP counts]
Syntax Description Syntax Description
Parameter
?
IP counts
Example Example
> srv dhcp ipcnt ?
% srv dhcp ipcnt <IP counts>
% Now: 150
Telnet Command:
Telnet Command:
This function allows users to turn off DHCP server. It needs rebooting router, please type
"sys reboot" command to reboot router.
Telnet Command:
Telnet Command:
This function allows users to turn on DHCP server. It needs rebooting router, please type
"sys reboot" command to reboot router.
Telnet Command:
Telnet Command:
This command allows users to set DHCP relay setting.
srv dhcp relay servip [server ip]
srv dhcp relay subnet [index]
Syntax Description
Syntax Description
Parameter
server ip
Index
Example
Example
> srv dhcp relay servip 192.168.1.46
> srv dhcp relay subnet 2
> srv dhcp relay servip ?
% srv dhcp relay servip <server ip>
% Now: 192.168.1.46
Telnet Command: srv dhcp startip
Telnet Command: srv dhcp startip
srv dhcp startip [?]
srv dhcp startip [IP address]
Syntax Description
Syntax Description
Vigor2762 Series User's Guide
srv dhcp ipcnt
srv dhcp ipcnt
Description
It means to display current used IP count number.
It means the number that you have to specify for the DHCP server.
srv dhcp off
srv dhcp off
srv dhcp on
srv dhcp on
srv dhcp relay
srv dhcp relay
Description
It means the IP address that you want to used as DHCP server.
It means subnet 1 or 2. Please type 1 or 2. The router will invoke
this function according to the subnet 1 or 2 specified here.
561