Draytek Vigor2762 series User Manual page 443

Vigor routers
we'll demonstrate our web design and how to configure the settings by introducing the
functionalities of Vigor router.
[Note]
Broadband router: Vigor2920/Vigor3200/Vigor2925/Vigo2960/Vigor3900
Modem router: Vigor2850/Vigor2762
VLAN Packets on Vigor routers
VLAN Packets on Vigor routers
Trunk mode of LAN
Trunk Port can carry the packets with VID but replace the Non-VID packet as the VID of
Trunk port while forwarding the packets to another switch.
Bridge mode of WAN
P1 and P2 are doing NAT flow to access to the internet, but P3 and P4 will forward the
packets between WAN and LAN ports directly.
Web User Interface
Web User Interface
So far, there are two kinds of open system on Vigor router. One is DrayOS, which is DrayTek
owned, and another is Linux-like which customized by DrayTek from OpenWRT. Here DrayOS
system is going to be introduced to you because it is the most stable and superfast booting
system in DrayTek products. If the UI style of yours is different from the following. It may
not DrayOS system with new web style or maybe the Linux-like model.
WAN
Vigor2762 Series User's Guide
[Note]
support Tag-based feature both on LAN and WAN interfaces. The next
433