Draytek Vigor2762 series User Manual page 492

Telnet Command:
Telnet Command:
This command allows users to enable/disable igmp proxy server.
Syntax Syntax
ip igmp_proxy set
ip igmp_proxy reset
ip igmp_proxy wan
ip igmp_proxy query
ip igmp_proxy ppp [0/1]
ip igmp_proxy status
Syntax Description
Syntax Description
Parameter
set
reset
wan
query
ppp
status
Example
Example
This command is for setting IGMP General Query Interval
The default value is 125000 ms
Current Setting is:130000 ms
> ip igmp_proxy set
% ip igmp_proxy [set|reset|wan|status], IGMP Proxy is ON
> ip igmp_proxy status
%% ip igmp_proxy [set|reset|wan|status], IGMP Proxy is ON
%%% igmp_proxy WAN:
239.255.255.250
239.255.255.250
482
ip igmp_proxy
ip igmp_proxy
Description
It means to enable proxy server.
It means to disable proxy server.
It means to specify WAN interface for IGMP service.
It means to set IGMP general query interval.
The default value is 125000 ms.
0 – No need to set IGMP with PPP header.
1 – Set IGMP with PPP header.
It means to display current status for proxy server.
state=1
timer=0
Vigor2762 Series User's Guide