Draytek Vigor2762 series User Manual page 560

-u <Service type>
-S <d/s>
-V <1/2/3>
[...]
Example
Example
> qos class -c 2 -n draytek -a -m 1 -l 192.168.1.50:192.168.1.80
Following setting will set in the class2
class 2 name set to draytek
Add a rule in class2
Class2 the 1 rule enabled
Set local address type to Range, 192.168.1.50:192.168.1.80
Telnet Command:
Telnet Command:
This command allows user to configure protocol type and port number for QoS.
Syntax
Syntax
qos type [-a <service name> | -e <no> | -d <no>].
Syntax Description
Syntax Description
Parameter
-a <name>
-e <no>
-d <no>
-n <name>
-t <type>
-p <port>
-l
550
21:SFTP 22:SIP 23:SMTP 24:SNMP 25:SNMP-TRAPS
26:SQL-NET 27:SSH 28:SYSLOG 29:TELNET 30:TFTP
Set a number to make user defined service type. Available number
is: 1 ~ 40.
Show the content for specified DSCP ID/Service type.
Show the rule in the specified class.
It means that you can type in several commands in one line.
qos type
qos type
Description
It means to add rule.
It means to edit user defined service type. "no" means the index
number. Available numbers are 1~40.
It means to delete user defined service type. "no" means the
index number. Available numbers are 1~40.
It means the name of the service.
It means protocol type.
6:
17:
0:
<1~254>:
It means service port. The typing format must be [start:end] (ex.,
510:330).
List user defined types. "no" means the index number. Available
numbers are 1~40.
tcp(default)
udp
tcp/udp
other
Vigor2762 Series User's Guide