Ii-1-2-1 Details Page For Pppoe/Pppoa In Wan1 (Physical Mode: Adsl) - Draytek Vigor2762 series User Manual

II-1-2-1 Details Page for PPPoE/PPPoA in WAN1 (Physical Mode: ADSL)

II-1-2-1 Details Page for PPPoE/PPPoA in WAN1 (Physical Mode: ADSL)
Available settings are explained as follows:
Item
Enable/Disable
Modem Settings
Vigor2762 Series User's Guide
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Set up the DSL parameters required by your ISP. These
settings configured here are specified for ADSL only.
Multi-PVC channel - The selections displayed here are
determined by the page of WAN >> Multi-PVC/VLAN. Select
M-PVCs Channel means no selection will be chosen.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
Protocol - Drop down the list to choose the one (PPPoE or
PPPoA) provided by ISP.
If you have already used Quick Start Wizard to set the
protocol, then it is not necessary for you to change any
settings in this group.
Modulation –Default setting is Multimode. Choose the one
that fits the requirement of your router.
59