Draytek Vigor2762 series User Manual page 266

Adsl2/2+ and vdsl2 router

Hide thumbs Also See for Vigor2762 series:

Table of Contents

Next, set another rule. Just open Firewall>>Filter Setup. Click the Set 2 link and

choose the Filter Rule 3 button.

Check the box of Check to enable the Filter Rule. Type the comments (e.g.,

open_ip). Click the Edit button for Source IP.

In default, the router will check the packets starting with Set 2, Filter

Rule 2 to Filter Rule 7. If Block If No Further Match for is selected for

Filter, the firewall of the router would check the packets with the rules

starting from Rule 3 to Rule 7. The packets not matching with the rules

will be processed according to Rule 2.

Vigor2762 Series User's Guide

Show Quick Links

Table of Contents