Draytek Vigor2762 series User Manual page 489

Syntax Syntax
ip telnet [IP address][Port]
Syntax Description
Syntax Description
Parameter
IP address
Port
Example
Example
> ip telnet 172.17.3.252 23
>
Telnet Command:
Telnet Command:
This command allows users to set the RIP (routing information protocol) of IP.
Syntax
Syntax
ip rip [0/1/2]
Syntax Description
Syntax Description
Parameter
0/1/2
Example Example
> ip rip 1
%% Set RIP LAN1.
Telnet Command:
Telnet Command:
This command allows users to set the RIP (routing information protocol) of WAN IP.
Syntax
Syntax
ip wanrip [ifno] -e [0/1]
Syntax Description
Syntax Description
Parameter
ifno
-e
Example
Example
Vigor2762 Series User's Guide
Description
Type the WAN or LAN IP address of the remote device.
Type a port number (e.g., 23).
Available settings: 0 ~65535.
ip rip
ip rip
Description
0 means disable;
1 means LAN1 and 2 means IP Routed.
ip wanrip
ip wanrip
Description
It means the connection interface.
1: WAN1,2: WAN2, 3: PVC3,4: PVC4,5: PVC5
Note: PVC3 ~PVC5 are virtual WANs.
It means to disable or enable RIP setting for specified WAN
interface.
1: Enable the function of setting RIP of WAN IP.
0: Disable the function.
479