Draytek Vigor2762 series User Manual page 71

ISP Access Setup
IP Address From ISP
Vigor2762 Series User's Guide
Path MTU to – Type the IP address as the specific

transmit path.
MTU reduce size by – It determines the decreasing

size of MTU value. For example, the number specified
in this field is "8". The maximum MTU size is "1500".
After clicking the "detect" button, the system will
calculate and get the suitable MTU value such as 1500,
1492, 1484 and etc., automatically.
Detect – Click it to detect a suitable MTU value

 Accept – After clicking it, the detected value will be
displayed in the field of MTU.
Enter your allocated username, password and
authentication parameters according to the information
provided by your ISP.
Service Name - Enter the description of the specific
network service.
Username – Type in the username provided by ISP in this
field.
Password – Type in the password provided by ISP in this
field.
Separate Account for ADSL – In default, WAN1 supports
VDSL2/ADSL and uses the same PPPoE account and password
for connection. If required, you can configure another
account and password for ADSL connection by checking this
box. If it is checked, the system will ask you to type another
group of account and password additionally.
PPP Authentication – Select PAP only or PAP or CHAP for
PPP.
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP before
you want to use this function.
Fixed IP – Click Yes to use this function and type in a fixed
IP address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address – Type the MAC address for the
router manually.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Applications >> Schedule web page and
you can use the number that you have set in that web page.
61